Version 4 (modified by trac, 6 years ago) (diff)


Trac Ticket Queries

In addition to reports, Trac provides support for custom ticket queries, which can be used to display tickets that meet specified criteria.

To configure and execute a custom query, switch to the View Tickets module from the navigation bar, and select the Custom Query link.


When you first go to the query page, the default filter will display tickets relevant to you:

  • If logged in then all open tickets, it will display open tickets assigned to you.
  • If not logged in but you have specified a name or email address in the preferences, then it will display all open tickets where your email (or name if email not defined) is in the CC list.
  • If not logged in and no name/email is defined in the preferences, then all open issues are displayed.

Current filters can be removed by clicking the button to the left with the minus sign on the label. New filters are added from the dropdown lists at the bottom corners of the filters box; 'And' conditions on the left, 'Or' conditions on the right. Filters with either a text box or a dropdown menu of options can be added multiple times to perform an Or on the criteria.

You can use the fields just below the filters box to group the results based on a field, or display the full description for each ticket.

After you have edited your filters, click the Update button to refresh your results.

Clicking on one of the query results will take you to that ticket. You can navigate through the results by clicking the Next Ticket or Previous Ticket links just below the main menu bar, or click the Back to Query link to return to the query page.

You can safely edit any of the tickets and continue to navigate through the results using the Next/Previous/Back to Query links after saving your results. When you return to the query any tickets which were edited will be displayed with italicized text. If one of the tickets was edited such that it no longer matches the query criteria , the text will also be greyed. Lastly, if a new ticket matching the query criteria has been created, it will be shown in bold.

The query results can be refreshed and cleared of these status indicators by clicking the Update button again.

Saving Queries

Trac allows you to save the query as a named query accessible from the reports module. To save a query ensure that you have Updated the view and then click the Save query button displayed beneath the results. You can also save references to queries in Wiki content, as described below.

Note: one way to easily build queries like the ones below, you can build and test the queries in the Custom report module and when ready - click Save query. This will build the query string for you. All you need to do is remove the extra line breaks.

Note: you must have the REPORT_CREATE permission in order to save queries to the list of default reports. The Save query button will only appear if you are logged in as a user that has been granted this permission. If your account does not have permission to create reports, you can still use the methods below to save a query.

You may want to save some queries so that you can come back to them later. You can do this by making a link to the query from any Wiki page.

[query:status=new|assigned|reopened&version=1.0 Active tickets against 1.0]

Which is displayed as:

Active tickets against 1.0

This uses a very simple query language to specify the criteria, see Query Language.

Alternatively, you can copy the query string of a query and paste that into the Wiki link, including the leading ? character:

[query:?status=new&status=assigned&status=reopened&group=owner Assigned tickets by owner]

Which is displayed as:

Assigned tickets by owner

Customizing the table format

You can also customize the columns displayed in the table format (format=table) by using col=<field>. You can specify multiple fields and what order they are displayed in by placing pipes (|) between the columns:


This is displayed as:

Results (1 - 3 of 1030)

1 2 3 4 5 6 7 8 9 10 11
Ticket Resolution Summary Owner Reporter
#1474 fixed No Hash entry in Release file ( PPA) flichtenheld Player701
#1473 notabug VPN connection didn't became as default gateway by default mvgavrilov
#1467 wontfix Building 2.4.12 on Ubuntu Jammy fails Werner1
1 2 3 4 5 6 7 8 9 10 11

Full rows

In table format you can also have full rows by using rows=<field>:


This is displayed as:

Results (1 - 3 of 1030)

1 2 3 4 5 6 7 8 9 10 11
Ticket Resolution Summary Owner Reporter
#1474 fixed No Hash entry in Release file ( PPA) flichtenheld Player701


Attempted to do an Ubuntu release upgrade from 20.04 LTS (focal) to 22.04 LTS (jammy), got this error:

Error during update

A problem occurred during the update. This is usually some sort of network problem, please check your network connection and retry.

W:Updating from such a repository can't be done securely, and is therefore disabled by default., W:See apt-secure(8) manpage for repository creation and user configuration details., W:No Hash entry in Release file /var/lib/apt/lists/partial/build.openvpn.net_debian_openvpn_stable_dists_jammy_InRelease, E:The repository ' jammy InRelease?' provides only weak security information.

Looks like indeed does not contain any hashes (MD5Sum, SHA1, SHA256, SHA512 are all empty).

But for all other Ubuntu versions, the corresponding Release file does have them. e.g.,

Kindly asking the PPA maintainers to look into this. Thank you very much.

#1473 notabug VPN connection didn't became as default gateway by default mvgavrilov

According to documentation VPN connection must not become a gateway only when a parameter is specified 'pull-filter ignore redirect-gateway'.

But I has config without 'pull-filter ignore redirect-gateway' and this connection not became as default gateway.

It a bug?

Here is my .ovpn file:

dev tun
proto udp4
remote 607
reneg-sec 86400
remote-cert-tls server
key-direction 1
Cut the certificate
# 2048 bit OpenVPN static key
-----BEGIN OpenVPN Static key V1-----
Cut the key
-----END OpenVPN Static key V1-----

#1467 wontfix Building 2.4.12 on Ubuntu Jammy fails Werner1

Hey there,

I tried to compile OpenVPN 2.4 branch from tarball on Ubuntu Jammy but ran into build errors.

gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include  -I../../include -I../../src/compat        -DPLUGIN_LIBDIR=\"/usr/local/lib/openvpn/plugins\"  -Wall -Wno-unused-parameter -Wno-unused-function -g -O2 -std=c99 -MT fdmisc.o -MD -MP -MF .deps/fdmisc.Tpo -c -o fdmisc.o fdmisc.c
mv -f .deps/comp-lz4.Tpo .deps/comp-lz4.Po
In file included from crypto_openssl.h:32,
                 from crypto_backend.h:33,
                 from crypto.h:128,
                 from crypto_openssl.c:42:
openssl_compat.h:281:1: error: static declaration of ‘EVP_PKEY_get_id’ follows non-static declaration
  281 | EVP_PKEY_id(const EVP_PKEY *pkey)
      | ^~~~~~~~~~~
/usr/include/openssl/evp.h:1306:5: note: previous declaration of ‘EVP_PKEY_get_id’ with type ‘int(const EVP_PKEY *)’ {aka ‘int(const struct evp_pkey_st *)’}
 1306 | int EVP_PKEY_get_id(const EVP_PKEY *pkey);
      |     ^~~~~~~~~~~~~~~
In file included from crypto_openssl.c:44:
openssl_compat.h: In function ‘EVP_PKEY_get_id’:
openssl_compat.h:283:23: error: invalid use of incomplete typedef ‘EVP_PKEY’ {aka ‘const struct evp_pkey_st’}
  283 |     return pkey ? pkey->type : EVP_PKEY_NONE;
      |                       ^~

Full configure and make log: All dependencies were installed via apt. The building was performed withing an LXC container.

I did not select Milestone or Version since I could not find the proper ones. I selected "minor" for priority since branch is oldstable and Ubuntu ships their own packages made from stable branch.

Please let me know if I missed something.

1 2 3 4 5 6 7 8 9 10 11

Query Language

query: TracLinks and the [[TicketQuery]] macro both use a mini “query language” for specifying query filters. Filters are separated by ampersands (&). Each filter consists of the ticket field name, an operator and one or more values. More than one value are separated by a pipe (|), meaning that the filter matches any of the values. To include a literal & or | in a value, escape the character with a backslash (\).

The available operators are:

= the field content exactly matches one of the values
~= the field content contains one or more of the values
^= the field content starts with one of the values
$= the field content ends with one of the values

All of these operators can also be negated:

!= the field content matches none of the values
!~= the field content does not contain any of the values
!^= the field content does not start with any of the values
!$= the field content does not end with any of the values

The date fields created and modified can be constrained by using the = operator and specifying a value containing two dates separated by two dots (..). Either end of the date range can be left empty, meaning that the corresponding end of the range is open. The date parser understands a few natural date specifications like "3 weeks ago", "last month" and "now", as well as Bugzilla-style date specifications like "1d", "2w", "3m" or "4y" for 1 day, 2 weeks, 3 months and 4 years, respectively. Spaces in date specifications can be omitted to avoid having to quote the query string.

created=2007-01-01..2008-01-01 query tickets created in 2007
created=lastmonth..thismonth query tickets created during the previous month
modified=1weekago.. query tickets that have been modified in the last week
modified=..30daysago query tickets that have been inactive for the last 30 days

See also: TracTickets, TracReports, TracGuide, TicketQuery