Changes between Version 2 and Version 3 of TapWindows6CodesignTests

Timestamp:

04/19/16 07:57:24 (8 years ago)

Author:

Samuli Seppänen

Comment:

--

TapWindows6CodesignTests

@@ -7 +7 @@
 = Testing the driver =
 
-These following two files files contain a tap-windows6 driver that has been signed using an EV code-signing certificate. As such, it should load cleanly on Windows 10, as well as Windows 7.
+These following two files files contain a tap-windows6 driver (tap6-ev-signed) that has been signed using an EV SHA2 code-signing certificate:
 
  * [http://build.openvpn.net/downloads/temp/tap6-ev-signed.zip tap6-ev-signed.zip]
@@ -30 +30 @@
 }}}
 
-If you're running a 32-bit OS replace "amd64" with "i386".
+If you're using a 32-bit OS replace "amd64" with "i386".
 
 Next check if a conflicting tap-windows drivers is installed:
@@ -44 +44 @@
 In this case there was.
 
-== Removing existing driver ==
+== Removing an existing driver ==
 
 If tap-windows6 driver was installed, you need to remove it:
@@ -67 +67 @@
 == Reporting results ==
 
-Both positive (e.g. "Loads fine on Windows 7 32-bit") and negative ("Fails on Windows 10 64-bit") reports are much appreciated. The test results are published in the test result table, below.
+Both positive (e.g. "Loads fine on Windows 7 32-bit") and negative ("Fails on Windows 10 64-bit") reports are much appreciated. The test results are published in the test result table below.
 
 = Test results =