Changes between Version 48 and Version 49 of HLKTesting


Ignore:
Timestamp:
06/20/19 11:08:37 (5 years ago)
Author:
Samuli Seppänen
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • HLKTesting

    v48 v49  
    6969== Set product type ==
    7070
    71 In the HLK Studio's Projet tab you will see a category called "Product Types" at the right, like in [https://docs.microsoft.com/en-us/windows-hardware/test/hlk/user/hlk-studio here]. This may not have anything listed. If this is the case you will do all this work and only get certified as an "Other Driver". Make sure it says LAN. I had to go back to the Selection Tab, right click on the TAP adapter and add the feature for Device.Network.LAN.PM (power management). This will add a few tests but all should pass.
     71In the HLK Studio's Projet tab you will see a category called "Product Types" at the right, like in [https://docs.microsoft.com/en-us/windows-hardware/test/hlk/user/hlk-studio here]. When you create a new project the "Product Types" section will be empty, and you need to make it says LAN, or you end up doing all the testing work and only get certified as an "Other Driver".
     72
     73HLK product types are listed in the [https://docs.microsoft.com/en-us/windows-hardware/test/hlk/user/hlk-product-type-matrix product type matrix]. The way to add the "LAN" product type is to go to the "Selection" Tab, select "Device Manager" on the left, then right click on the TAP adapter and add the feature for Device.Network.LAN.PM (power management). HLK then notices that all features for the "LAN" product type are met and it adds the "LAN" product type to the project.
    7274
    7375== Loading compatibility playlists ==