| | 33 | |
| | 34 | * [wiki:265-how-do-i-enable-ip-forwarding How do I enable IP forwarding?] |
| | 35 | * [wiki:287-is-ipv6-support-plannedin-the-works Is IPv6 supported?] |
| | 36 | * [wiki:251-openvpn-server-successfully-connected-a-client-to-it-but-when-i-try-to-connect-a-second-client-the OpenVPN server successfully connected a client to it, but when I try to connect a second client, the] |
| | 37 | * [wiki:257-can-an-openvpn-server-be-set-up-on-a-machine-with-a-single-nic Can an OpenVPN server be set up on a machine with a single NIC?] |
| | 38 | * [wiki:261-when-i-try-configure-on-red-hat-9-linux-or-higher-it-complains-about-openssl-headers-not-found When I try ./configure on Red Hat 9 Linux or higher, it complains about OpenSSL headers not found.] |
| | 39 | * [wiki:263-openvpn-can-ping-both-peers-but-i-cant-reach-any-of-the-other-machines-on-the-remote-subnet OpenVPN can ping both peers, but I can't reach any of the other machines on the remote subnet.] |
| | 40 | * [wiki:269-tue-oct-26-143448-2004-36880-write-udpv4--no-buffer-space-available-code105 Tue Oct 26 14:34:48 2004 36880: write UDPv4: No buffer space available (code=105)] |
| | 41 | * [wiki:271-i-can-ping-through-the-tunnel-but-any-real-work-causes-it-to-lock-up-is-this-an-mtu-problem I can ping through the tunnel, but any real work causes it to lock up. Is this an MTU problem?] |
| | 42 | * [wiki:273-qifconfig-poolq-option-use-a-30-subnet-4-private-ip-addresses-per-client-when-used-in-tun-mode? "ifconfig-pool" option use a /30 subnet (4 private IP addresses per client) when used in TUN mode?] |
| | 43 | * [wiki:285-everything-seems-to-be-configured-correctly-but-i-cant-ping-across-the-tunnel Everything seems to be configured correctly, but I can't ping across the tunnel.] |
| | 44 | * [wiki:299-can-openvpn-handle-the-situation-where-both-ends-of-the-connection-are-dynamic Can OpenVPN handle the situation where both ends of the connection are dynamic?] |
| | 45 | * [wiki:313-how-can-i-connect-windows-xp-to-a-linux-based-samba-server-using-routing-rather-than-bridging How can I connect Windows XP to a Linux-based Samba server using routing rather than bridging?] |
| | 46 | * [wiki:315-i-get-the-error-cannot-ioctl-tunsetiff-tun0-file-descriptor-in-bad-state-errno77 I get the error Cannot ioctl TUNSETIFF tun0: File descriptor in bad state (errno=77)] |
| | 47 | * [wiki:321-remap-local-addresses-to-connect-two-networks-with-an-overlap-in-the-private-address-range Remap local addresses, to connect two networks with an overlap in the private address range?] |
| | 48 | * [wiki:323-i-want-to-set-up-an-ethernet-bridge-on-the-1921681024-subnet-existing-dhcp I want to set up an ethernet bridge on the 192.168.1.0/24 subnet. existing DHCP.] |
| | 49 | * [wiki:325-openvpn-as-a--forking-tcp-server-which-can-service-multiple-clients-over-a-single-tcp-port OpenVPN as a , forking TCP server which can service multiple clients over a single TCP port?] |
| | 50 | * [wiki:327-changed-hex-bytes-in-the-static-key-the-key-still-connects-to-a-remote-peer-using-the-original-key Changed hex bytes in the static key, the key still connects to a remote peer using the original key.] |
