Version 11 (modified by 15 months ago) (diff) | ,
---|
OpenVPN 2.6.0 -- Released 25 January 2023
The OpenVPN community project team is proud to release OpenVPN 2.6.0. This is a release with some major new features.
For details see Changes.rst
Changes since RC2:
- Various bugfixes, see Changes.rst
Windows MSI changes since RC2:
- Included openvpn-gui updated to 11.36.0.0. See CHANGES.rst.
- DCO driver is now included as a installer module (msm) so that other products (like OpenVPN Connect) can share the DCO installation.
New features and improvements in 2.6.0 compared to 2.5.8:
- Data Channel Offload (DCO) kernel acceleration support for Windows, Linux, and FreeBSD.
- OpenSSL 3 support, which is now the default on Windows.
- Improved handling of tunnel MTU, including support for pushable MTU.
- Outdated cryptographic algorithms disabled by default, but there are options to override if necessary.
- Reworked TLS handshake, making OpenVPN immune to replay-packet state exhaustion attacks.
- Added --peer-fingerprint mode for a more simplistic certificate setup and verification.
- Added Pre-Logon Access Provider support to OpenVPN GUI for Windows.
- Improved protocol negotiation, leading to faster connection setup.
- Updated easy-rsa3 bundled with the installer on Windows.
On Windows DCO will be used by default for client connections unless the configuration contains settings that are not DCO compatible, such as compression. DCO support on Linux requires an additional kernel module to be installed, this is available from our software repositories for Linux, and is also available for OpenVPN3 Linux client.
Windows 64-bit MSI installer | GnuPG Signature | OpenVPN-2.6.0-I001-amd64.msi |
Windows ARM64 MSI installer | GnuPG Signature | OpenVPN-2.6.0-I001-arm64.msi |
Windows 32-bit MSI installer | GnuPG Signature | OpenVPN-2.6.0-I001-x86.msi |
Source archive file | GnuPG Signature | openvpn-2.6.0.tar.gz |
OpenVPN 2.6_rc2 -- Released 12 January 2023
The OpenVPN community project team is proud to release OpenVPN 2.6_rc2. This is a release with some major new features and currently in beta (you can also download the stable release should you require it).
For details see Changes.rst
Changes since RC1:
- add rate limiter for incoming "initial handshake packets", enabled by default with a limit of 100 packets per 10 seconds. This change makes OpenVPN servers uninteresting as an UDP reflection DDoS engine.
- report
CONNECTED,ROUTE_ERROR
to management GUI if connection to server succeeds but not all routes can be installed (Windows and Linux/Netlink only, so far) - Various bugfixes, see Changes.rst
Windows MSI changes since RC1:
- Included openvpn-gui updated to 11.35.0.0. See CHANGES.rst.
- New feature: Support the
CONNECTED,ROUTE_ERROR
management message (see above)
- New feature: Support the
- Fix some issues related to upgrading:
- "Run on logon" option not preserved when updating from 2.5 to 2.6
- Fix check for running service when upgrading from old NSIS installations
Debian packages changes since RC1:
- Packages for Debian bookworm are now available.
New features and improvements in 2.6.0 compared to 2.5.8:
- Data Channel Offload (DCO) kernel acceleration support for Windows, Linux, and FreeBSD.
- OpenSSL 3 support, which is now the default on Windows.
- Improved handling of tunnel MTU, including support for pushable MTU.
- Outdated cryptographic algorithms disabled by default, but there are options to override if necessary.
- Reworked TLS handshake, making OpenVPN immune to replay-packet state exhaustion attacks.
- Added --peer-fingerprint mode for a more simplistic certificate setup and verification.
- Added Pre-Logon Access Provider support to OpenVPN GUI for Windows.
- Improved protocol negotiation, leading to faster connection setup.
- Updated easy-rsa3 bundled with the installer on Windows.
On Windows DCO will be used by default for client connections unless the configuration contains settings that are not DCO compatible, such as compression. DCO support on Linux requires an additional kernel module to be installed, this is available from our software repositories for Linux, and is also available for OpenVPN3 Linux client.
Windows 64-bit MSI installer | GnuPG Signature | OpenVPN-2.6_rc2-I002-amd64.msi |
Windows ARM64 MSI installer | GnuPG Signature | OpenVPN-2.6_rc2-I002-arm64.msi |
Windows 32-bit MSI installer | GnuPG Signature | OpenVPN-2.6_rc2-I002-x86.msi |
Source archive file | GnuPG Signature | openvpn-2.6_rc2.tar.gz |
OpenVPN 2.6_rc1 -- Released 28 December 2022
The OpenVPN community project team is proud to release OpenVPN 2.6_rc1. This is a release with some major new features and currently in beta (you can also download the stable release should you require it).
For details see Changes.rst
Changes since Beta 2:
- Officially deprecate NTLMv1 proxy auth method in 2.6. Will be removed in 2.7.
- Support unlimited number of connection entries and remote entries.
- New management commands to enumerate and list remote entries.
- Various bugfixes, see Changes.rst
Windows MSI changes since Beta 2:
- Included openvpn-gui updated to 11.34.0.0. See CHANGES.rst.
- New feature: Connections active on exit/logout are now automatically restarted in the next session of the GUI
- Windows installers are now built with Visual Studio 17 2022 (previously built with VS 16 2019)
New features and improvements in 2.6.0 compared to 2.5.8:
- Data Channel Offload (DCO) kernel acceleration support for Windows, Linux, and FreeBSD.
- OpenSSL 3 support, which is now the default on Windows.
- Improved handling of tunnel MTU, including support for pushable MTU.
- Outdated cryptographic algorithms disabled by default, but there are options to override if necessary.
- Reworked TLS handshake, making OpenVPN immune to replay-packet state exhaustion attacks.
- Added --peer-fingerprint mode for a more simplistic certificate setup and verification.
- Added Pre-Logon Access Provider support to OpenVPN GUI for Windows.
- Improved protocol negotiation, leading to faster connection setup.
- Updated easy-rsa3 bundled with the installer on Windows.
On Windows DCO will be used by default for client connections unless the configuration contains settings that are not DCO compatible, such as compression. DCO support on Linux requires an additional kernel module to be installed, this is available from our software repositories for Linux, and is also available for OpenVPN3 Linux client.
Windows 64-bit MSI installer | GnuPG Signature | OpenVPN-2.6_rc1-I001-amd64.msi |
Windows ARM64 MSI installer | GnuPG Signature | OpenVPN-2.6_rc1-I001-arm64.msi |
Windows 32-bit MSI installer | GnuPG Signature | OpenVPN-2.6_rc1-I001-x86.msi |
Source archive file | GnuPG Signature | openvpn-2.6_rc1.tar.gz |
OpenVPN 2.6_beta2 -- Released 15 December 2022
The OpenVPN community project team is proud to release OpenVPN 2.6_beta2. This is a release with some major new features and currently in beta (you can also download the stable release should you require it).
For details see Changes.rst
Changes since Beta 1:
- Transport statistics (bytes in/out) for DCO environments. Currently only for Windows clients and FreeBSD servers. Other platforms will be fixed in next release.
- Various bugfixes, see Changes.rst
Windows MSI changes since Beta 1:
- Included openvpn-gui updated to 11.33.0.0. See CHANGES.rst.
- Update included pkcs11-helper so it can load pkcs11 providers from outside of its own install directory.
- Add legacy provider for included OpenSSL so that the workarounds documented for old ciphers work on Windows.
New features and improvements in 2.6.0 compared to 2.5.8:
- Data Channel Offload (DCO) kernel acceleration support for Windows, Linux, and FreeBSD.
- OpenSSL 3 support, which is now the default on Windows.
- Improved handling of tunnel MTU, including support for pushable MTU.
- Outdated cryptographic algorithms disabled by default, but there are options to override if necessary.
- Reworked TLS handshake, making OpenVPN immune to replay-packet state exhaustion attacks.
- Added --peer-fingerprint mode for a more simplistic certificate setup and verification.
- Added Pre-Logon Access Provider support to OpenVPN GUI for Windows.
- Improved protocol negotiation, leading to faster connection setup.
- Updated easy-rsa3 bundled with the installer on Windows.
On Windows DCO will be used by default for client connections unless the configuration contains settings that are not DCO compatible, such as compression. DCO support on Linux requires an additional kernel module to be installed, this is available from our software repositories for Linux, and is also available for OpenVPN3 Linux client.
Windows 64-bit MSI installer | GnuPG Signature | OpenVPN-2.6_beta2-I001-amd64.msi |
Windows ARM64 MSI installer | GnuPG Signature | OpenVPN-2.6_beta2-I001-arm64.msi |
Windows 32-bit MSI installer | GnuPG Signature | OpenVPN-2.6_beta2-I001-x86.msi |
Source archive file | GnuPG Signature | openvpn-2.6_beta2.tar.gz |
OpenVPN 2.6_beta1 -- Released 2 December 2022
The OpenVPN community project team is proud to release OpenVPN 2.6_beta1. This is a release with some major new features and currently in beta (you may find stable release should you require it).
For details see Changes.rst
There were a number of new features and improvements:
- Data Channel Offload (DCO) kernel acceleration support for Windows, Linux, and FreeBSD.
- OpenSSL 3 support, which is now the default on Windows.
- Improved handling of tunnel MTU, including support for pushable MTU.
- Outdated cryptographic algorithms disabled by default, but there are options to override if necessary.
- Reworked TLS handshake, making OpenVPN immune to replay-packet state exhaustion attacks.
- Added --peer-fingerprint mode for a more simplistic certificate setup and verification.
- Added Pre-Logon Access Provider support to OpenVPN GUI for Windows.
- Improved protocol negotiation, leading to faster connection setup.
- Updated easy-rsa3 bundled with the installer on Windows.
On Windows DCO will be used by default for client connections unless the configuration contains settings that are not DCO compatible, such as compression. DCO support on Linux requires an additional kernel module to be installed, this is available from our software repositories for Linux, and is also available for OpenVPN3 Linux client.
Windows 64-bit MSI installer | GnuPG Signature | OpenVPN-2.6_beta1-I001-amd64.msi |
Windows ARM64 MSI installer | GnuPG Signature | OpenVPN-2.6_beta1-I001-arm64.msi |
Windows 32-bit MSI installer | GnuPG Signature | OpenVPN-2.6_beta1-I001-x86.msi |
Source archive file | GnuPG Signature | openvpn-2.6_beta1.tar.gz |