= Deprecated Options in OpenVPN [https://openvpn.net/ OpenVPN] is a software VPN product which has been around since [https://en.wikipedia.org/wiki/OpenVPN May 2001]. And it has mostly been backwards compatible on the most important features through all these years. But the world moves forward, security issues are discovered, and expectations of how a secure VPN should be configured have changed over the years. As OpenVPN carries a lot of options (over 230), we need to do a clean-up here from time to time. The main goal is to be as backwards compatible in regards to the ''configuration files'' as possible. We do not recommend running any older OpenVPN releases than the latest v2.3 series. Whenever possible you should always upgrade to the latest available OpenVPN release. But some times we unfortunately need to remove old options as they impose a security risk to VPN configurations. In this wiki page, we will try to keep an up-to-date list of all options we have deprecated, when they will be removed, the new alternative approach and the reasoning behind removing the option. This wiki page summarizes the "Deprecated features" section in the [https://github.com/OpenVPN/openvpn/blob/master/Changes.rst#deprecated-features Changes.rst] file which is distributed with the source code. [[TOC(notitle, inline)]] == Option: `--key-method` == ||=Status =||Pending removal || ||=Deprecated in: =||OpenVPN v2.4 || ||=To be removed in: =||'''OpenVPN v2.5''' || ||=Affects: =||Client and server || ||=Result if used: =||OpenVPN will ignore the option and provide a warning || ||=Replaced by: =||Not replaced || ||=Examples: =||(N/A)|| OpenVPN have used `--key-method 2` since OpenVPN v2.0 if it was not provided. Using the older `--key-method 1` was primarily present to allow OpenVPN clients running older releases than v2.0 to connect to a v2.0 server. This older key-method is not recommended as the key negotiation method is not as strong as the current default. == Option: `--tls-remote` == ||=Status =||**Removed in OpenVPN v2.4.0** || ||=Deprecated in: =||OpenVPN v2.3 || ||=To be removed in: =||'''OpenVPN v2.4''' || ||=Affects: =||Client and server || ||=Result if used: =||OpenVPN will not start due to unknown option || ||=Replaced by: =||`--verify-x509-name` || ||=Examples: =||`--verify-x509-name 'C=KG, ST=NA, L=Bishkek, CN=Server-1'`|| || ||`--verify-x509-name Server-1 name` || || ||`--verify-x509-name Server name-prefix` || == Option: `--compat-names` == ||=Status =||**Removed in OpenVPN v2.5** || ||=Deprecated in: =||OpenVPN v2.3 || ||=Affects: =||Client and server || ||=Result if used: =||OpenVPN will print an error message and **terminate** || ||=Replaced by: =||Not replaced || ||=Examples: =||(N/A)|| ||Ref:|| https://www.mail-archive.com/openvpn-devel@lists.sourceforge.net/msg17804.html || OpenVPN used the former OpenSSL formatting of X.509 Subject fields. They could look like this: {{{ /C=US/L=Somewhere/CN=John Doe/emailAddress=john@example.com }}} As of OPenVPN v2.3, this format was changed to the more widely used X.509 formatting: {{{ C=US, L=Somewhere, CN=John Doe, emailAddress=john@example.com }}} This option would in addition add remapping of characters and rendering most characters outside the typical a-z/A-Z/0-9 range to be replaced by an underscore (_) - unless the `no-remapping` flag was added. This behaviour would in many cases be required by older authentication plug-ins or scripts which was not able to process the newer format. As this behaviour is now considered bad, it is expected that authentication plug-ins and scripts will have had enough time to get an update to handle the new X.509 Subject formatting. == Option: `--no-name-remapping` == ||=Status =||**Removed in OpenVPN v2.5** || ||=Deprecated in: =||OpenVPN v2.3 || ||=Affects: =||Client and server || ||=Result if used: =||OpenVPN will print an error message and **terminate** || ||=Replaced by: =||Not replaced || ||=Examples: =||(N/A) || ||Ref:|| https://www.mail-archive.com/openvpn-devel@lists.sourceforge.net/msg17804.html || This is essentially just an alias for `--compat-names no-remapping`. This option would avoid the character remapping of characters being outside the typical a-z/A-Z/0-9 range in the X.509 Subject identifiers. == Option: `--no-iv` == ||=Status =|| **Removed in OpenVPN v2.5** || ||=Deprecated in: =||OpenVPN v2.4 || ||=To be removed in: =||'''OpenVPN v2.5''' || ||=Affects: =||Client and server || ||=Result if used: =||OpenVPN will refuse the option and provide an error message that the option is no longer supported || ||=Replaced by: =||Not replaced || ||=Examples: =||(N/A) || This option will disable OpenVPN's use of the cipher initialization vector (IV). This is considered very harmful on today's ciphers and will severely reduce the security of VPN tunnels. As the use cases for `--no-iv` are few and mostly obscure, it was decided to remove this option to ensure the tunnels security can not be deliberately reduced. == Option: `--no-replay` == ||=Status =||Pending removal || ||=Deprecated in: =||OpenVPN v2.4 || ||=To be removed in: =||'''OpenVPN v2.5'''|| ||=Affects: =||Client and server || ||=Result if used: =||OpenVPN will refuse the option and provide an error message that the option is no longer supported || ||=Replaced by: =||Not replaced || ||=Examples: =||(N/A) || This option will disable OpenVPN's use of replay protection. This slightly reduces the overhead (8 bytes per packet for static keyed setups, 4 bytes for TLS with CBC mode, 0 bytes for TLS with GCM/OFB/CFB mode). The overhead reduction in CBC mode can better be achieved by switching to GCM mode. The remaining benefit for static key mode does not warrant the keeping this option around. The added code complexity adds attack surface and increases the chance of users reducing their security more than they realise. == Policy: Removal of insecure ciphers: Ciphers with cipher block-size less than 128 bits (most commonly `BF`, `DES`, `CAST5`, `IDEA` and `RC2`) == ||=Status =||Pending removal || ||=Deprecated in: =||OpenVPN v2.4 || ||=To be removed in: =||'''OpenVPN v2.6''' || ||=Affects: =||Client and server || ||=Result if used: =||OpenVPN will not start due to incorrect cipher being used|| ||=Replaced by: =||Replaced by stronger ciphers, most commonly AES-256-GCM || ||=Examples: =||(N/A) || After the discovery of the [https://sweet32.info SWEET32 Birthday attacks on 64-bit block ciphers] any cipher using a cipher block length smaller than 128 bits is considered insecure and prune to be successfully attacked. The cipher block length is '''''not''''' an indication of the cipher ''key'' length. == Policy: Migrating away from deprecated ciphers With the OpenVPN v2.4 release a new feature was introduced, Negotiable Crypto Parameters (NCP). This allows users to seamlessly migrate away from deprecated ciphers without much extra work. If both client and server runs OpenVPN v2.4 ''without'' NCP being disabled (`--ncp-disable`), the tunnel will automatically be upgraded to `AES-256-GCM`. If the environment also uses clients older than OpenVPN v2.4, the server can deploy: {{{ --ncp-ciphers AES-256-GCM:AES-256-CBC:BF-CBC }}} This will allow older clients to add or change `--cipher` to use `AES-256-CBC` instead of the default `BF-CBC` or any other cipher enlisted. This can be done on client configuration files on a one-by-one approach. Unmodified clients will be able to connect as before. Once all clients have been updated to OpenVPN v2.4 or later (preferred) or have their configuration altered, the `--ncp-ciphers` list can be modified to remove `BF-CBC`. '''WARNING:''' This migration approach '''will not''' work after the release of OpenVPN v2.6. As of that release, `BF-CBC`, `CAST` or `RC2` ciphers '''will not''' be accepted any more. '''NOTE:''' For Fedora 27, if the `openvpn-server@.service` unit file is used for ''server configurations'', this migration path have already been enabled. == Option: `--keysize` == ||=Status =||Pending removal || ||=Deprecated in: =||OpenVPN v2.4 || ||=To be removed in: =||'''OpenVPN v2.6''' || ||=Affects: =||Client and server || ||=Result if used: =||OpenVPN will ignore the option and provide a warning|| ||=Replaced by: =||Not replaced || ||=Examples: =||(N/A) || The `--keysize` option was only useful to change the key length when using the `BF`, `CAST6` or `RC2` ciphers. For all other ciphers the key-size is fixed with the chosen cipher. As OpenVPN v2.6 will no longer support any of these variable length ciphers, this option will be removed as well to avoid confusion. == Option: `--comp-lzo` == ||=Status =||Currently not planned for removal, see description for details || ||=Deprecated in: =||OpenVPN v2.4 || ||=To be removed in: =||(not decided) || ||=Affects: =||Client and server || ||=Result if used: =||OpenVPN will ignore the option and provide a warning|| ||=Replaced by: =|| Not replaced || ||=Examples: =||(N/A) || Compression is not recommended and is a feature users should avoid using. See `--compress` for more details. == Option: `--compress` == ||=Status =||Currently not planned for removal, see description for details || ||=Deprecated in: =||OpenVPN v2.5 || ||=To be removed in: =||(not decided) || ||=Affects: =||Client and server || ||=Result if used: =||OpenVPN will ignore the option and provide a warning|| ||=Replaced by: =|| Not replaced || ||=Examples: =||(N/A) || Compression is not recommended and is a feature users should avoid using. To signal this clearly, `--comp-lzo` and `--compress` are discouraged and considered deprecated features. Beginning with 2.5, these options will no longer enable compression, just enable the compression framing to be able to receive compressed packets. == Option: `--ifconfig-pool-linear` == ||=Status =||Pending removal || ||=Deprecated in: =||OpenVPN v2.1 || ||=To be removed in: =||'''OpenVPN v2.5''' || ||=Affects: =||Client and server || ||=Result if used: =||OpenVPN will not start due to unknown option|| ||=Replaced by: =||`--topology` || ||=Examples: =||`--topology p2p` || This option will not work with Windows based clients. Since the `--topology p2p` mode is equivalent to `--ifconfig-pool-linear` and works with Windows, this option will be removed. == Option: `--client-cert-not-required` == ||=Status =||Pending removal || ||=Deprecated in: =||OpenVPN v2.4 || ||=To be removed in: =||'''OpenVPN v2.5''' || ||=Affects: =||Client and server || ||=Result if used: =||OpenVPN will not start due to unknown option|| ||=Replaced by: =||`--verify-client-cert` || ||=Examples: =||`--verify-client-cert none` || || || `--verify-client-cert optional` || || || `--verify-client-cert require` || The replacement option allows a far more fine grained control of authentication methods, and can allow a combination of only username/password authentication, only certificate based authentication or a combination. This would not be possible with the old `--client-cert-not-required` option. == Option: `--ns-cert-type` == ||=Status =||Pending removal || ||=Deprecated in: =||OpenVPN v2.4 and v2.3.18 || ||=To be removed in: =||'''OpenVPN v2.6 or v2.7''' || ||=Affects: =||Client and server || ||=Result if used: =||OpenVPN will complain and remap to replacement option|| ||=Replaced by: =||`--remote-cert-tls` || ||=Examples: =||`--remote-cert-tls server` || || ||`--remote-cert-tls client` || As of OpenSSL v1.1, the nsCertType extension in X.509 certificates are no longer supported. This extension is old and has been deprecated for a long time. The replacement option, `--remote-cert-tls` is a macro which sets the `--remote-cert-ku` and `--remote-cert-eku` to appropriate values, depending on whether you to check if the remote provided certificate is a server certificate or client certificate. As the extended key usage extension is far more commonly used today, this is effectively the equivalent of `--ns-cert-type`. For the time being, if `--ns-cert-type` is used in OpenVPN v2.5 or later, it will currently be re-mapped to `--remote-cert-tls` and complain about a deprecated option being used. This cannot be turned into a "hard error" for v2.5 due to compatibility issues with OpenVPN AS and commercial upgrade cycles. == Option: `--tun-ipv6` == ||=Status =||Removed in OpenVPN 2.4l || ||=Deprecated in: =||OpenVPN v2.4 || ||=To be removed in: =||''OpenVPN v2.4'' || ||=Affects: =||Client and server || ||=Result if used: =||OpenVPN will complain and ignore the option|| ||=Replaced by: =||Not replaced || ||=Examples: =|| || This option was useful when IPv6 tun support was non standard and was an internal/user specified flag that tracked the Ipv6 capability of the tun device. Today, all supported OS support IPv6 and indicating explicit support is not needed any more. Also tun-ipv6 is pushable by the remote so not putting tun-ipv6 does not forbid ipv6 addresses. == Policy: Automatic Up-casing of X509 Certificate fieldnames == ||=Status =||Planned for removal || ||=Deprecated in: =||OpenVPN v2.3 || ||=To be removed in: =|| || ||=Affects: =||Server || ||=Result if used: =||n/a (Always used)|| ||=Replaced by: =||Not replaced || ||=Examples: =||This feature converts an all-lowercase fieldname to uppercase characters, e.g., ou -> OU || See --x509-username-field in https://community.openvpn.net/openvpn/wiki/Openvpn24ManPage for a detailed explanation. == Option: `--max-routes` == ||=Status =||Planned for removal || ||=Deprecated in: =||OpenVPN v2.4 || ||=To be removed in: =|| || ||=Affects: =|| || ||=Result if used: =||ignored|| ||=Replaced by: =|| || ||=Examples: =|| || == Option: `--dhcp-release` == ||=Status =||Enabled by default || ||=Deprecated in: =||OpenVPN v2.4 || ||=To be removed in: =|| || ||=Affects: =|| || ||=Result if used: =||ignored|| ||=Replaced by: =|| || ||=Examples: =|| || ||=Notes: =|| Windows only || == Option: `--route-nopull` == ||=Status =||Disabled by default || ||=Deprecated in: =|| Deprecation is under discussion || ||=To be removed in: =|| || ||=Affects: =|| Client routing, dhcp-options and Windows firewall || ||=Result if used: =|| See the manual || ||=Replaced by: =|| `--pull-filter` || ||=Examples: =|| || ||=Notes: =|| Openvpn devs would like to know if you use this option || To emulate `--route-nopull` with `--pull-filter`: - `--pull-filter ignore`: `--redirect-private` `--redirect-gateway` `--block-ipv6` `--client-nat` `--route` `--route-ipv6` `--route-gateway` `--route-metric` `--ip-win32` `--dhcp-option` `--dhcp-renew` `--register-dns` `--tap-sleep` `--block-outside-dns` - Do not ignore: `--route-gateway` `--route-delay` == Option: `--secret` == ||=Status =||Planned for removal || ||=Deprecated in: =|| OpenVPN v2.4 || ||=Removed in: =|| OpenVPN v2.5 || ||=Affects: =|| `--genkey` || ||=Result if used: =|| User Warning printed || ||=Replaced by: =|| `secret` (No leading double dash) || ||=Examples: =|| Use `--genkey secret filename` || ||=Notes: =|| || == Option: `--ncp-disable` == ||=Status =||Planned for removal || ||=Deprecated in: =|| OpenVPN v2.5 || ||=To be removed in: =||OpenVPN v2.6 || ||=Affects: =|| `--ncp-disable` || ||=Result if used: =|| User Warning printed || ||=Replaced by: =|| || ||=Examples: =|| || ||=Notes: =|| `ncp-disable` was mainly a debug option that allowed disabling ncp if there were problem with dynamic cipher negotiation. With the current status of NCP, this option is no longer necessary. || == plugin: `_v1 and _v2 functions for open and func call` == ||=Status =||Planned for removal || ||=Deprecated in: =|| OpenVPN v2.5 (**to be done**) || ||=To be removed in: =||OpenVPN v2.6 or v2.7 || ||=Affects: =|| plugins still use the old API || ||=Result if used: =|| User Warning printed, later: refuse to load plugin || ||=Replaced by: =|| _v3 functions || ||=Examples: =|| || ||=Notes: =|| the _v3 API functions can do everything _v1 and _v2 can do, and the existence of the old functions mostly confuses everyone || == Option: `--inetd` == ||=Status =||Planned for removal || ||=Deprecated in: =|| OpenVPN v2.5 || ||=To be removed in: =||OpenVPN v2.6 || ||=Affects: =|| `--inetd` || ||=Result if used: =|| User Warning printed || ||=Replaced by: =|| || ||=Examples: =|| || ||=Notes: =|| This is a very limited and not-well-tested way to run OpenVPN, on TCP and TAP mode only, which complicates the code quite a bit for little gain. To be removed in OpenVPN 2.6 (unless users protest). || == Windows: `openvpn-legacy-service` == ||=Status =|| Gone || ||=Deprecated in: =|| A Galaxy a long time ago .. || ||=To be removed in: =|| It's Gone MacREADY! || ||=Affects: =|| Windows only || ||=Result if used: =|| Service is not configured and cannot be used: See #1344 || ||=Replaced by: =|| `openvpnserv2.exe` Windows Service: `OpenVPNService` || ||=Examples: =|| n/a || ||=Notes: =|| To use `openvpnserv2.exe` see `C:\Program Files\Openvpn\config-auto\readme.txt` ||